WP-8841-EN-G-CR

WinPac Controller/PXA270/CE5.0/8slots/1USB

  • Built-in VGA Port
  • I/O Module Hot Swap Ability (Will be available)
  • (For High Profile I-87K Modules Only)
  • Rich I/O Expansion Ability (RS-232/485, Ethernet, FRnet, CAN)
  • Built-In Flash Disk (31 MB for WP-8x4x, 63 MB for WP-8x3x)
  • Dual Watchdog Timer
  • Dual Battery-Backup SRAM (512KB)
  • Dual Ethernet Ports
  • Redundant Power Input
  • Ventilated Housing Design Allows Operation Between -25°C ~ +75°C
Wi style='display:none' nPAC-8000 is the second generation PAC of ICP DAS. It equips PXA270 CPU (520MHz) running a Windows CE .NET 5.0 operating system, variant connectivities (VGA, USB, Ethernet, RS-232/485) and 1/4/8 slots for high performance parallel I/O modules (high profile I-8K series) and serial-type I/O modules (high profile I-87K I/O modules).

Its operating system,Windows CE 5.0, has many advantages, including hard real-time capability, small core size, fast boot speed, interrupt handling at a deeper level, achievable deterministic control and low cost. Using Windows CE 5.0 in the WinPAC-8000 gives it the ability to run PC-based Control software such as Visual Basic.NET, Visual C#, Embedded Visual C++, SCADA software, Soft PLC …etc.
Fields Value
RS-232 Ports 2
RS-485 Ports 1
RS-232/485 Ports 1
LAN Ports 2
I/O Slot 8
Operating System WinCE
Installed Software ISAGRAF

WP-8841-EN-G-CR

دانلود فایل

WinPac Controller/PXA270/CE5.0/8slots/1USB

1396/9/4 Wi style='display:none' nPAC-8000 is the second generation PAC of ICP DAS. It equips PXA270 CPU (520MHz) running a Windows CE .NET 5.0 operating system, variant connectivities (VGA, USB, Ethernet, RS-232/485) and 1/4/8 slots for high performance parallel I/O modules (high profile I-8K series) and serial-type I/O modules (high profile I-87K I/O modules).

Its operating system,Windows CE 5.0, has many advantages, including hard real-time capability, small core size, fast boot speed, interrupt handling at a deeper level, achievable deterministic control and low cost. Using Windows CE 5.0 in the WinPAC-8000 gives it the ability to run PC-based Control software such as Visual Basic.NET, Visual C#, Embedded Visual C++, SCADA software, Soft PLC …etc.
دانلود فایل