I-8830-G CR

Controller/Intel 80188/DCON/8slots/512KB

  • Supports IPv4
  • Supports the Ethernet or RS-232 communication interface
  • Supports DCON communication protocol
  • Dual Bus designed to supports I-8K and I-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules
  • Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules
  • By using the VxComm Utility, PC can use Virtual COM Port to communicate with the remote Ethernet I/O
  • I/O configurable using DCON Utility via Ethernet port or RS-232 Port
  • Firmware updated via the RS-232 port
  • Firmware auto scan AI modules and can map alarm to DO modules on the slots
  • Dual Watch Dog mechanism enable I-8000 system can work reliablely under harsh environment
  • Ventilated housing designed to operate between –25°C to +75°C
  • Using DIN rail clips or Screw poles around the corners allows the control unit to be easily mounted on the control box
  • Frame Ground provides a path for bypassing ESD, allowing enhanced static protection (ESD) capability and ensures that the module is more reliable
  • Various SDKs provided (free)
  • DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc
Th style='display:none' e I-8430 and I-8830 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.

The CPU is a 8-bit 80188 (40MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.
Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc.

Although all the SDK drivers support only COM Port interface,users can also use there SDK by installing the VxComm Utility . VxComm Utility can create Virtual COM Port to map the Ethernet Port, then the I/O modules can be easily added to the I-8430/I-8830 and can be quickly integrated into an existing system.
Fields Value
RS-232 Ports 1
RS-232/485 Ports 1
I/O Slot 8

I-8830-G CR

دانلود فایل

Controller/Intel 80188/DCON/8slots/512KB

1396/9/6 Th style='display:none' e I-8430 and I-8830 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.

The CPU is a 8-bit 80188 (40MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.
Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc.

Although all the SDK drivers support only COM Port interface,users can also use there SDK by installing the VxComm Utility . VxComm Utility can create Virtual COM Port to map the Ethernet Port, then the I/O modules can be easily added to the I-8430/I-8830 and can be quickly integrated into an existing system.
دانلود فایل